Which System You Should Opt for Leakage in Your Home!

Leaky surface is the biggest worry of every home owner. These days’ ratio of leak problems is higher in residential buildings as compare to commercial. In fact, it raises the demand of painting projects also. With the effect of leaky surfaces, interior and exterior both walls look terrible and demands re-touch every time rainy season get over or waterproofing project ends.

But, the valid and durable solution of this problem is waterproofing only. Actually, if you put waterproof paints on your wall, it will also come out in the form of blisters or inner pressure will put crack on top layer. Waterproof paints can’t replace membranes which has been specially designed for building barrier between water and surface.

Even for the use in balconies, decks, laundries, bathrooms, shower area etc., Polyurethane waterproofing membrane is the best solution. It seals every extra space, and form strong shield against water. It consists of water based, weather resistant, non-flammable, non-hazardous properties which can be used as a water barrier under slabs and mortar toppings.

So, whenever you feel need of waterproofing in wet areas of your home. Always ask for polyurethane waterproofing products to professional and save your dollars by using appropriate system for problem.

Where Your Waterproofing Project Went Wrong

Every building today or in future require waterproofing service. It is not because waterproofing systems get weak by time. Actually some systems are designed with a specific period of service life. After some time, effectiveness of these measures get decreased which left the concrete more susceptible to water.

Apart from that there are various reasons which lead you to waterproofing failures like lack of contractors’ experience and cost cutting. Contractors who just put their head into issue without knowledge always result in your wastage of money and time. They might use inappropriate membrane or might install system wrongly.

The most dangerous act during construction is cost-cutting. Most of the professionals select inferior and inadequate products for the sake of cost-cutting and fulfilling owners wish of low service charges. But if you want to get rid of leakage problems for long time than you should understand the importance of waterproofing membrane.

Today, there are many waterproofing suppliers available in Australis. But selecting right product and right brand is the real key to successful job. So, just research a bit more and find adequate service providers like Durotech, who have earned their name with quality service not with discounted products.

How You Can Assist Water Proofers To Solve Problem More Accurately!

No matter how well you take care of protective measure while constructing new building. A small way to water can ruin all peace and waste dollars you have spent on it. If we put light on this matter, why we take precautionary measures? To increase the life of structure, to save it from elements than may result in disaster. So, it’s better to update knowledge of market trend as which company is providing best waterproofing service. Especially when you own a basement.

Protecting your home from seeping water due to heavy rainstorm and flooding is possible no matter you know about the process or not. What you need is information of best waterproofing service providers. Than all it takes few steps for them to fix leakage problems. Though you don’t do it yourself, but you can take care of it by periodic check-ups. So, if you find any hole or crack you can take help of professionals in advance.

You can’t trust any company randomly as this problem require practical results. But yes! By understanding basics of waterproofing you can get better service. To get desired result, it become necessary that you know what you want water proofers to do. Your foremost duty is to take trip of suspected areas and look closely for holes, cracks etc. which is the main reason of seeping water. Sometimes, water pipes, drainage pipes are also culprit of water spots on exterior and interior walls.

As of now, Durotech industries is among the best waterproofing companies that have solved problems of many people living in Australia. So, never hesitate to give a call if you too find leakage in your home to avoid heavy expenses later.

Why Waterproofing Is Crucial For Bathroom!

Bathrooms are the most common, leakage prone area in the home. There are number of things that causes moisture in this area that further leads to major problems. Water which finds its way from even a small hole, never comes from the place it appears. And finding the main root of leakage is the main task which cannot be performed by amateur water proofer.

Sometimes, problem ignored from long time reacts more destructively as it leads to some other issues like musty odor, peeling up of tiles, water shortage, blisters on paint etc. Apart from that, continuous leak also make floor slippery which have risk of fall down. These issues are something which need to be address timely.

While talking about bathroom area shower, washbasins, taps, tiles, bath tub etc. are the culprits of leakage. To address this problem, waterproofing membrane is the best remedy till date. Once it’s been installed prior to the fitting and tiling, no part of your bathroom than be affected by water.

It’s always difficult to spend money on already completed project to fix errors. Take wise decisions at right time and save your money!

Save Your Dollars By Taking Right Move in Addressing Water Leakage!

Water related problems are common in newly built and old edifices these days. Apart from the fact that water is essential for survival. It’s not less than curse if it put destructive force on your building structure. It leads to numerous problems like paint peeling, rotten wood, structural failure, mold growth that not only reduce lifespan of a building but also end up costing thousands of dollars on damage.

Waterproofing is crucial to prevent structure from major damage. As its always better to spent money on prevention measures beforehand rather than on repairs. Nowadays, plenty of companies in Sydney is dealing with products essential for stopping water intrusion in a home.

Following are the main source of leakage in a structure, identifying and fixing it can protect you from hassle while dealing with problem:-

• Exterior walls – These are like a shield of house that protect interior from UV rays, rain water and exposed elements. Make sure these are properly maintained.
• Windows and doors – Small holes and cracks at edge of these area also make way for water.
• Roof – If water penetrates into your mansion, replace roofing system.
• Foundation walls – Always examine that area where water piping is going through exterior walls.
• Plumbing – faulty drainage systems also cause leakage. Periodic inspection is a best way to prevent.

Always use products with remarkable experience and eliminate leakage issue as soon as possible after aligning to avoid major loss. As things get worse with time if untreated. It’s better to minimize damage by addressing problems quickly.

How To Get Rid of Leakage in Shower Rooms!

Shower rooms can have a massive impact on house. It can and do transform a home. Building sustainable wet areas is a long term vision and its construction includes a right sort of waterproofing products. Tiles are crucial for providing luxurious look to bathroom though there are lots of thing that play equally important role in designing like shower curtain, storage solutions, designer trays and shower kit etc.

But all these amenities go wasted if not properly installed. For the error free service, one has to hire professionals. Because most common and detrimental mistakes occur while construction. After that application of waterproofing systems are essential to avoid leakage problem which has been a most experienced issue of every homeowner.

Waterproofing membrane, sealants and sheet membranes are some systems which are specially designed to prevent water penetration in shower rooms. It is always recommended that one should use specialized systems as per instructions mentioned on it. Dry area and timely application is necessary for the desired results.

So, always use technically tested products and follow instruction while application. Well maintained shower rooms, balconies, decks and architectural design enhance the value of property.

Waterproofing Mistakes That Shaken Your Home Structure

Concrete spalling, blisters on walls, algae, mould etc. are the visible signs of leakage in a building. Even though these are not the instant leakage signs. It became visible after damaging inside surface because of untreated leakage. Water is a fluid which find its way from even small cracks and holes that cause leakage.

Now, these faults can be fixed by several measures like waterproofing membrane, sealants, coatings, sheet membrane and more. These products provide perfect waterproof lining around the surface and prevent infiltration of water. But there are chances of waterproofing failure, if you get poor workmanship which can be account as a 90% reason of occurrence of water again in the treated area.

Analyzation, preparation and installation of critical area is the three main parts need to follow for effective job. There are some main reasons that cause damage on the structure like completing of service life of the membranes, movement in building also cause membrane to tear, unexperienced contractor, cost cutting measure during construction can also be blamed for this and wrong diagnose which includes inappropriate product and poor understanding of problem.

So, please avoid such issues next time when you look for waterproofing service and save your penny to be wasted on repairing costs.

Effective Way of Waterproofing Shower Room

Waterproofing is the integral part of every construction project. In a residential or commercial building, there are several areas which are prone to leakage. Washroom, kitchen and roof are some parts that require timely maintenance. As you can’t predict that a particular area will going to leak. Especially shower room which is not treated as the left alone area now. It is no doubt one of the most expensive project of construction that requires special attention to avoid any future hurdle of water leaking.

Normally, tiled shower rooms require careful plumbing installation and detailed membrane application in construction phase. Poor job in installing pipes, taps etc., leads to leaks and costly repairs. The better option to reduce the chances of leakage is advance prevention measures. But when you search for products there are various companies offering best solution and systems that might confuse you to adopt accurate product.

The most effective way of waterproofing shower room is to inspect, analyze accurate product and application of that product in right manner. Waterproofing membrane is required to installed behind and underneath shower tiles. You can make choice of product on the basis of substrate, temperature, humidity and underfloor temperature etc.

How You Care Your Retaining Walls

Our first priority after constructing house is maintenance. If you take care of regular home tasks, you can reduce your future headaches and prevent your money from wastage. Like if we talk about the areas who require periodic inspection, then these are roofs, retaining walls, basement, foundation walls etc.

Basements and retaining walls are the areas which cannot be neglected in our maintenance process. As these areas are the main pillars of our house. Failure of retaining walls leads to total collapse one day if not diagnosed at time. The reason behind its failure is improper drainage system and water. After heavy rainfall, water is collected behind the walls and put pressure. Sometimes improper sloping of water also collect water behind walls.

You cannot stop water as it’s a natural phenomenon. But you can take protection measures to make your walls weather and water resistant. Waterproofing is the best solution to prevent your walls and basements from water. The condition here is you use right solution. Like Durotech has quality protective coating for exposed surfaces which is liquid applied and form flexible lining that has an excellent resistance to water.

If you hire unprofessional water proofer and don’t bother to buy quality product, it will only provide you temporary solution. For the long run, you have to take advice of experienced contractors.

Five Symptoms You Need Waterproofing Solution

Waterproofing industry is getting boom with a rising problems of water leakage. Australian construction is also facing waterproofing problems which become the major cause of building defects. In your building every part can be effected from water. Internal wet areas, exposed areas, water can penetrate from anywhere and reduce the life of your structure if not diagnosed timely.

It is essential that you have an ability of sensing water leakage problems in your house.

Few are the signs of leakage in your building:-

1.    Musty Smell – when you feel musty smell in your room on entering. It clearly means some part of your room is affected by mold or mildew which cause this smell.
2.    Concrete Spalling – It is caused by excess moisture and if left untreated can also cause extensive structural damage.
3.    Paint Damage – Chipped paint is the another sign of water problem.
4.    Water stains – When water collected on your roofs it leads to spots on ceilings from where you can get an idea that water has seeped into your walls.
5.    Efflorescence – White powdery chalk like substance near walls is the another sign of leaking.

If you too have found these symptoms in your house and now get worried about solutions. Don’t worry! You can find various waterproofing service providers in Australia with best in class solutions like sealants, membranes and coatings etc.